Up and down swipes don't work for switching between the front and rear cameras only the toggle next to the shutter release does that. Changing modes works with side swipes (on the black bezel, not the viewfinder itself), and you can also tap on the modes you can see to switch to those directly. The familiar Xiaomi camera app has its quirks, but it's nothing outside the norm regarding basic use. For what it's worth, that's the same selfie setup as on the Mix Fold 2. The fixed-focus lens has an f/2.2 aperture. The internet doesn't reveal much about it, but Xiaomi says it has a 1/3.47" optical format and a 0.8µm pixel size. We wish Xiaomi had used the 5MP unit from the previous generation, but that's not the case.įor selfies, we have the 20MP Sony IMX596 sensor, which should be a Quad Bayer design. The macro camera relies on a 2MP Galax圜ore GC02 sensor behind an f/2.4 lens. The lens has a fixed focus, an f/2.2 aperture, and a field of view that should be 120 degrees. It's based on the 8MP Samsung S5K4H7 ISOCELL Slim 1/4" sensor with a 1.12µm pixel pitch.
The ultrawide is the same between both 12Ts. All of this indicates that the HP1 can come packaged in different camera modules. The aperture on the Xiaomi is listed at f/1.7, as opposed to the f/1.9 on the Moto. The Motorola's camera lens had a focal length of 6.88mm (as per EXIF) as opposed to 7.01mm on the Xiaomi. We've already seen this sensor once - on the Motorola Edge 30 Ultra, but these two cameras are not exactly identical. This camera has a field of view of 85 degrees according to Xiaomi specs, which translates to an equivalent focal length of 23-24mm (EXIF data claims 23mm). The 12T non-Pro, meanwhile, comes with a different 108MP imager (1/1.67", 0.64µm).Īnother positive development is that the lens here is stabilized, something which wasn't available on the 11T Pro.
Pro tools dark mode upgrade#
It's certainly an upgrade over the 108MP (1/1.52", 0.7µm) unit of last year's model. It's one of the larger sensors overall in the industry, too, with an optical format of 1/1.22".
The main camera uses the Samsung HP1 sensor - a Tetra2pixel (that would be Tetra-to-the-power-of-two) design that's meant to bin its tiny 0.64µm pixels 16-to-1, resulting into combined 2.56µm pixels. But then there's the unremarkable 8MP ultrawide, joined by an even less exciting 2MP macro unit. The headliner is the 200MP primary camera, the big number making big promises.
Pro tools dark mode pro#
The Xiaomi 12T Pro is equipped with a triple-camera system on its back, and it's a spec sheet that impresses and disappoints at the same time. The usual 2+1 cameras on the back, but one of them is 200MP
0 kommentar(er)
